StorCase Technology CSI-to-SCSI Single & Dual RAID - Manual (Page 135)

122 Configuration
StorCase Technology, Inc. Dual RAID Module User's Guide - Rev. A03
Enabling/Disabling SMART Changes
This function allows the user to enable/disable the ability to change the Self-Monitoring,
Analysis, and Reporting Technology (SMART) settings for all drives connected to the
controller.
The SMART settings can be set to ENABLE, DISABLE, or DON'T MODIFY (the controller will
not change any drive's SMART settings). Default setting is DON'T MODIFY.
NOTE: Typically, SMART is disabled by the drive manufacturer (default). Enable
SMART on the drive itself, if needed.
To enable/disable SMART changes:
1. Select Configuration Menu from the System Menu and press Enter.
The Configuration Menu screen should now display (Figure 31).
2. Select Disk Configuration and press Enter.
The Disk Configuration screen should now display (Figure 76).
3. Select SMART and press Enter.
The SMART screen will display (Figure 79).
The current setting is marked with an * next to it.
Figure 79: SMART Screen