StorCase Technology CSI-to-SCSI Single & Dual RAID - Manual (Page 26)

Dual RAID Module User's Guide - Rev. A03 StorCase Technology, Inc.
Installation 13
Figure 9: Typical SIngle RAID Module Unit Stand-Alone Dual Port Configuration
(Multiple InfoStation Chassis with I/O Repeater Modules Installed)
IFSII_DR7
Single RAID Module Unit
T
=Terminator Host B Host A
T T
Disk Ch. 1
(7 Drives)
Disk Ch. 2
(7 Drives)
InfoStation II #2
Disk Ch. 1
(7 Drives)
Disk Ch. 2
(7 Drives)
T T
InfoStation II #1
PC
Dual Channel
SCSI Controller
NOTES: Controller A (Primary) disk channel SCSI ID is factory set to SCSI ID7.
DO NOT configure any other devices to ID7 on the disk channel, or the configuration will fail to operate!
Controller B (Secondary) disk channel SCSI ID is factory set to SCSI ID6.
DO NOT configure any other devices to ID6 on the disk channel, or the configuration will fail to operate!
Up to 14 disks per SCSI Channel with Dual RAID Controller Module Unit installed.
(14 Disks x 2 Channels = 28 Disks Total)