Configuring the battery, Enabling/disabling the battery – StorCase Technology CSI-to-SCSI Single & Dual RAID User Manual

Page 118

Dual RAID Module User's Guide - Rev. A03

StorCase Technology, Inc.

Configuration

105

Figure 66: Cache Lock Screen

Select the desired option and press Enter.

Configuring the Battery

This function allows the user to configure two (2) settings for the battery.

Enable/disable the battery (default is battery enabled).
Set the battery age/disable battery life monitor.

Enabling/Disabling the Battery

This function allows the user to run the controller without a battery. However, if there is no

battery in the controller, the controller's alarm will sound. To eliminate this alarm condition,

simply disable the battery (default is battery enabled).

NOTES:

Disable the battery ONLY if the controller is hooked up to an Uninterruptable

Power Supply (UPS), so that loss of power is prevented.
Battery holds up to 72 Hours of back-up power.
Average time to recharge battery is 4 hours.
Average lifespan of a battery is 3 Years.