Kipp&Zonen 2AP Sun Tracker User Manual
Page 35
INSTALLATION AND SETUP
34
4.5.3
Large Side Mounting Plate
The 2AP is supplied with two standard 127 mm diameter by 6 mm thick instrument Side Mounting
Plates. Each plate is fastened to a split clamp and secured to the Zenith shaft using a cap screw.
Optional are the 203 mm diameter by 6 mm thick Large Side Mounting Plates, which are designed
to be used in conjunction with the Pointing & Shading Ball Assembly. The supplied plates can be
customized to meet your specific configuration requirements. The hole patterns of both the
Standard and the Large Side Mounting Plates are given in figures 4.16 and 4.17.
Figure 4.16: Standard Side Mounting Plate Hole Pattern.
Figure 4.17: Large Side Mounting Plate Hole Pattern.