Kipp&Zonen 2AP Sun Tracker User Manual
Page 33
INSTALLATION AND SETUP
32
There are two mounting configurations for the Rear Mounting Plate height location, see figure 4.13:
•
The higher position, specially designated for ventilated Kipp & Zonen Pyranometers. This
has a height of 129.5 mm with respect to the centres of the shading spheres.
•
The lower position, which has a height of 171.7 mm with respect to the centres of the
shading spheres. This allows larger instruments to be mounted.
Figure 4.13: Upright Plate Mounting Patterns.
See figures 4.14 and 4.15 for more information on the height of the Rear Mounting Plate with
respect to the centres of the shading spheres of the Pointing & Shading Ball Assembly.