Kipp&Zonen 2AP Sun Tracker User Manual
Page 15
INSTALLATION AND SETUP
14
Figure 3.5: Communication and Power Cable Wiring.
Figure 3.6: Power Cable Connector
Important: Circuit breaker
A power on/off switch is not a part of the 2AP, requirements for electrical equipment installed
outdoors specify that:
•
A power isolator (switch or circuit-breaker) must be included in the cable installation.
•
The isolator must be in close proximity to the equipment and within easy reach of the
operator.
•
The isolator must be marked as the power disconnection device for the equipment.