Flexible line keys, Table 34. dterm iii series lcd indicator states – Dialogic M7324 User Manual
Page 153
4. PBX Systems
4.7.3. Flexible Line Keys
There are 16 Flexible Line keys located on the top of the DTerm Series III
telephone as shown in
. These keys are configured by the system
programmer to perform many different functions. When programming the
telephone, the Flexible Line keys are used to select the programming mode or
sub-mode. There is a two color LED indicator associated with each Flexible
Line key. The LEDs can be in any of the states listed in
Table 34. DTerm III Series LCD Indicator States
State Value
(Hex)
Off 0x00
On 0x01
Ringing 0x02
Hold 0x03
Error 0x04
Unknown 0x05
There is an LCD indicator associated with each Line Key.
• The lower nibble (lower 4 bits of the value ANDed with 0x0f) of the LCD
indicators value can take one of the six states in
.
• The upper nibble (value ANDed with 0xf0) can take one of the values in
.
153