Dialogic M7324 - Manual (Page 104)

Dialogic
®
PBX Integration Board User’s Guide
4.5. Nortel Norstar and Nortel BCM
The Norstar product family includes the Compact version and the expandable
Modular model. The Dialogic
® PBX Integration Board can be used with the
DR5, CICS, or MICS switches. The PBXs use digital signaling to control their
station sets and digitized voice. PBXs use plug-in station modules to connect
to station sets, and trunk modules to connect to trunk lines.
The Business Communications Manager (BCM) product family includes the
BCM50, BCM200, BCM400, and BCM1000. The Dialogic
®
PBX Integration
Board can be used with any of these PBXs.
The Dialogic ® PBX Integration Board has either four or eight channels that
can be connected directly to a station module in a Nortel Norstar or Nortel
BCM. The switch has many standard features that are supported by the PBX
Integration Board, such as:
• direct inward dialing (DID)
• speed dialing
• hunt groups
• message waiting indication
• user programmable Feature Keys
• called/calling number identification
• call forwarding
The information in the following subsections is applicable to both the Nortel
Norstar and Nortel BCM product families, unless otherwise indicated:
•
4.5.1. Nortel Norstar Programming Requirements – for Norstar only
•
4.5.2. Nortel BCM Programming Requirements – for BCM only
•
4.5.3. Using the Dialogic® PBX Integration Board – for Norstar and
BCM
•
4.5.4. Programmable Memory Keys – for Norstar and BCM
•
4.5.5. Display Keys – for Norstar and BCM
•
4.5.6. Alphanumeric Display – for Norstar and BCM
•
4.5.7. Setting the Message Waiting Indicator – for Norstar and BCM
•
4.5.8. Transferring a Call – for Norstar and BCM
•
4.5.9. Called ID on Forwarded Calls – for BCM only
104