Dialogic M7324 - Manual (Page 151)

4. PBX Systems
set these features exactly (and assigned to the right keys) so that the PBX
Integration Board and the Dialogic
® Unified API can function correctly.
NEAX 2400 IMS and NEAX 2000 IVS, IVS2, and IPS Programming
Requirements
Transfers:
Allow the ports connected to the Dialogic
®
PBX Integration Board permission
to use the transfer key.
Message Waiting Indicator (MWI):
The default access dial strings for the Dialogic ® PBX Integration Board are set
to **9 (on) and ##9 (off). If the PBX has not been set to use these dial strings,
you must:
• Use the d42_setparm( ) function to change dial string programmed in the
PBX to:
• D4BD_MSGACCESSON
• D4BD_MSGACCESSOFF
OR
• Change the PBX access dial string to **9 (on) or ##9 (off).
4.7.2. Using the Dialogic
®
PBX Integration Board
The Dialogic
®
PBX Integration Board can perform functions available to a
DTerm Series III telephone set (see Figure 16 ). The PBX Integration Board
can:
• transfer calls
• set the message waiting indicator
• read the LCD display
• read LCD indicators
• read the called/calling number ID
• press keys
151