Programmable feature keys, Reading lcd indicators, Table 31. m2616 lcd indicator states – Dialogic M7324 User Manual
Page 142
Dialogic
®
PBX Integration Board User’s Guide
4.6.3. Programmable Feature Keys
, there are 16 Programmable Feature Keys located
below the display on the M2616 telephone. These keys can be configured
either during PBX installation or by the user (using the telephone set or the
Dialogic
®
PBX Integration Board). The Line, Program, and Handsfree keys
are assigned during PBX configuration and cannot be user programmed. There
is an LCD indicator associated with each Feature Key. The LCD indicators are
triangular and can take on one of the six states listed in
.
Table 31. M2616 LCD Indicator States
State Value
(Hex)
off 0x00
on 0x01
ringing 0x02
hold 0x03
error 0x04
unknown 0x05
Reading LCD Indicators
The Dialogic
®
PBX Integration Board can determine the state of its LCD
indicators by using the d42_indicators( ) function to retrieve the LCD
indicators data. This function places the Line Indicator data (16 bytes) in an
application buffer. Bytes 00-15 contain the indicator status for Feature Keys
00-15, respectively (see
142