Hanna Instruments HI 901 - Manual (Page 17)

2-11
SETUP
2.3.5 Connection to Earth
It is important that the titrator has a good connection to Earth. The titrator is properly
grounded through the power cord and for added confidence the unit can be connected to
Earth using the optional 5 mm screw and the nut connection located on the rear panel of
titrator.
2.3.6 Floppy Disk Drive
Report files, new created (user) methods, standard methods can be transferred to and
from the titrator using a standard 3.5” floppy disk.
Connect to Earth (optional)