Setup – Hanna Instruments HI 901 User Manual
Page 12
2-6
SETUP
2.3.3
Titrator Left-side View
2.3.4Titrator Assembly
Note: Assembly operations must be completed before connecting the titrator to the power-supply
voltage!
2.3.4.1 Assembling Stirrer Stand and Support
Follow these steps to assemble the stirrer:
Remove the screws (2) from the titrator chassis (1).
Attach the stirrer stand (3) to the titrator chassis. Make sure to position the stirrer
stand close to the wall of the chassis.
Tighten the stirrer stand (3) using the previously removed screws (2).
Screw the stirrer support (4) in the stirrer stand (3).