Hanna Instruments HI 901 - Manual (Page 121)

9-11
MAINTENANCE, PERIPHERALS
9.3.3 Connecting a Printer
A variety of parallel printers can be connected to the parallel port of the titrator using a
standard DB25–pin cable.
Warning:The titrator and the external printer must be both turned OFF from the main
switch before making the connection.
Connect the external printer to the standard 25–pin Socket.
Turn on the titrator and then the printer.
9.3.4Connecting to a Computer
The titrator can be connected to a computer using a standard serial cable with a standard
DB9 pin connector. HI 900 PC application needs to be installed on the PC.