Hanna Instruments HI 901 - Manual (Page 103)

8-3
AUXILIARY FUNCTIONS
8.1 Burette
To access the Burette screen, press from the main screen.
Highlight the desired option and then press .
8.1.1 Prime Burette
The Prime Burette option is used to mechanically fill the burette before starting a set of
analysis.
Two rinses cycles of burette are shown in the figure below. The dispensing tube is connected
on the right side and the aspiration tube on the left side.
Note: Before starting this operation, the aspiration tube must be inserted in the titrant
bottle.
8 AUXILIARY FUNCTIONS