beautypg.com

Source[1..n]:current:accbase – EXFO IQS-2400 WDM Laser Source for IQS-500/600 User Manual

Page 99

background image

SCPI Command Reference

WDM Laser Source

93

Product-Specific Commands—Description

SOUR:STAB? (repeat until the returned value is

not 1)

SOUR:CURR:ACCB 0.0854

Notes

The current properties of the laser may change

with time. For this reason, if a setpoint was

defined in High Wavelength Stability or On/Off

modulation mode, and you want to return to it at

a later date, the wavelength and power may

differ from those defined with the current step

and temperature step when the setpoint was

created. To cancel this effect, when creating a

setpoint in these modes, the base current is

recorded internally. This base current is sent to

the instrument when returning to the mentioned

setpoint. All this is done automatically and is

transparent to the user.

See Also

SOURce[1..n]:CURRent:ACCBase?

SOURce[1..n]:STABle?

SOURce[1..n]:WAVelength:MODE

SOURce[1..n]:WAVelength:MODE?

:SOURce[1..n]:CURRent:ACCBase