EXFO IQS-2400 WDM Laser Source for IQS-500/600 - Manual (Page 25)

Getting Started with Your WDM Laser Source
WDM Laser Source 19
Entering Values Using Sliders and Numeric Boxes
Entering Values Using Sliders and Numeric
Boxes
Many parameters in IQS Manager and module applications can be set
using the following tools.
³
Slider: Drag it to the desired value on the scale below.
³
Navigation buttons: Click either buttons to move the slider. The slider
moves by steps corresponding to the number in the fine-tuning box,
which you can change by using the up and down arrow buttons next to
the box. You cannot change the list of fine-tuning values from here.
³
Numeric box: Click it to display the on-screen numeric pad, which you
can use to enter a powe value.
To enter a value using the numeric box:
1. Use the
button to clear the entry display.
2. Enter the value.
3. Click OK to confirm the value.
Numeric box
button Fine-tuning
box
Slider
Navigation buttons
Parameter identification
Toggle button Backspace button
(to correct a value)
Clear button
Entry display