EXFO IQS-2400 WDM Laser Source for IQS-500/600 - Manual (Page 114)

SCPI Command Reference
108 IQS-2400
Product-Specific Commands—Description
:SOURce[1..n]:POWer:LIMit:LOW?
Description This query returns the minimum power that can
be used with the SOURce[1..n]:APCOutput
command.
*RST has no effect on this command.
Syntax :SOURce[1..n]:POWer:LIMit:LOW?
Parameter(s) None
Response Syntax
Response(s) Power:
The response data syntax for is
defined as a
element.
The response is the minimum source
output power in the currently selected power
unit (watts or dBm). To select the current power
unit, use the UNIT[1..n]:POWer command.
Example(s) UNIT:POW DBM
SOUR:POW:LIM:LOW? Returns -4.600000E-001
Notes To set the signal output power, use the
SOUR:APCO or SOUR:POW command.
See Also SOURce[1..n]:APCOutput
SOURce[1..n]:POWer:LIMit:HIGH?
SOURce[1..n]:POWer:STEP?
SOURce[1..n]:POWer:RESolution?
UNIT[1..n]:POWer
SOURce[1..n]:POWer[:LEVel][:IMMediate]
[:AMPLitude]