EXFO IQS-2400 WDM Laser Source for IQS-500/600 - Manual (Page 115)

SCPI Command Reference
WDM Laser Source 109
Product-Specific Commands—Description
:SOURce[1..n]:POWer:LIMit:HIGH?
Description This query returns the maximum power at which
the output signal can be set with the
SOURce[1..n]:APCOutput command.
*RST has no effect on this command.
Syntax :SOURce[1..n]:POWer:LIMit:HIGH?
Parameter(s) None
Response Syntax
Response(s) Power:
The response data syntax for is
defined as a
element.
The response is the maximum source
output power in the currently selected power
unit (watts or dBm). To select the current power
unit, use the UNIT[1..n]:POWer command.
Example(s) UNIT:POW DBM
SOUR:POW:LIM:HIGH? Returns 1.000000E+001
Notes To set the signal output power, use the
SOUR:APCO or SOUR:POWcommand.
See Also SOURce[1..n]:APCOutput
SOURce[1..n]:POWer:LIMit:LOW?
SOURce[1..n]:POWer:STEP?
SOURce[1..n]:POWer:RESolution?
UNIT[1..n]:POWer
SOURce[1..n]:POWer[:LEVel][:IMMediate]
[:AMPLitude]