EXFO IQS-2400 WDM Laser Source for IQS-500/600 - Manual (Page 160)

SCPI Command Reference
154 IQS-2400
Product-Specific Commands—Description
:SOURce[1..n]:SETPoint
Description This command sets the instrument to a
predefined setpoint. No command is provided to
create setpoints. Setpoints have to be created
from within the IQS application.
At *RST, the resolution mode, the wavelength,
the power, the delta temperature and the delta
current are set to the default instrument values.
Syntax :SOURce[1..n]:SETPoint
,APC|ACC
Parameter(s)
³
SetpointName:
The program data syntax for is
defined as a
element.
The parameter is the name of
the setpoint. This name is not case-sensitive.
³
LaserMode:
The program data syntax for the second
parameter is defined as a
PROGRAM DATA> element. The allowed
elements for
this parameter are: APC|ACC.
This parameter represents the mode of the
setpoints.
APC sets Normal mode.
ACC sets High Wavelength Stability mode (HWS).
Example(s) SOUR:SETP "CH38C", APC