EXFO IQS-2400 WDM Laser Source for IQS-500/600 - Manual (Page 54)

Controlling Multiple WDM Laser Source Modules
48 IQS-2400
Selecting Modules to Control
Selecting Modules to Control
Before you can modify the module parameters, you must specify which
modules you intend to use.
To select IQS-2400 WDM Laser Source modules:
1. On the Modules/Config function tab, select the boxes corresponding
to the modules you want to control.
OR
Click Select All if you want to work with all IQS-2400 WDM Laser
Source modules.
2. Click Apply Selections and click the Instruments function tab.
Specific
module
selection
All
modules
selection