EXFO IQS-2400 WDM Laser Source for IQS-500/600 - Manual (Page 111)

SCPI Command Reference
WDM Laser Source 105
Product-Specific Commands—Description
Example(s) SOUR:PULM:STAT OFF
SOUR:WAV:MODE NORMAL
UNIT:POW DBM
SOUR:POW 3.5
Notes This command must only be used when the
instrument is either in Normal or Dither
Modulation mode. If the instrument is not in one
of these modes, the parameters will be read as a
requested wavelength and a requested power.
This will generate the following error message:
“Invalid instrument mode”.
See Also SOURce[1..n]:POWer[:LEVel][:IMMediate]
[:AMPLitude]?
UNIT[1..n]:POWer
:SOURce[1..n]:POWer[:LEVel]
[:IMMediate][:AMPLitude]