EXFO IQS-2400 WDM Laser Source for IQS-500/600 - Manual (Page 98)

SCPI Command Reference
92 IQS-2400
Product-Specific Commands—Description
:SOURce[1..n]:CURRent:ACCBase
Description This command is used to set the ACC base
current. The base current is the actual current of
the laser. For this command to function properly,
the instrument must be in High Wavelength
Stability or On/Off modulation mode and the
SOURce[1..n]:STABle? query must return 1
(stable). Normally, this command would rarely
be used.
*RST has no effect on this command.
Syntax :SOURce[1..n]:CURRent:ACCBase
Parameter(s) ACCBase:
The program data syntax for is
defined as a
DATA> element.
The parameter is the desired
current of the instrument in amperes.
Example(s) SOUR:PULM:STATE OFF
SOUR:WAV:MODE HRES
/* Under FDA jurisdiction, a password must be
entered before turning the laser on. */
SOUR:POW:PROT:SPWD "safekey"
SOUR:POW:STAT ON