beautypg.com

Using quicktools – EXFO IQS-2400 WDM Laser Source for IQS-500/600 User Manual

Page 64

background image

Monitoring WDM Laser Source Modules

58

IQS-2400

Using QuickTools

Using QuickTools

With QuickTools, you can fine-tune your module directly, while keeping an
eye on your entire test setup.

Note: You can only access QuickTools if the module’s monitor window is selected

from the Monitors function tab and is currently active.

To start QuickTools:
1. From the Monitors function tab, elect the monitor window of the

module you wish to control.

2. Using the arrow button in the upper left corner, select QuickTools.

The corresponding monitor window flashes when QuickTools is
activated.

Note: If you want to open the actual application for your module rather than

QuickTools, click Show Controller.

See also other documents in the category EXFO Measuring instruments: