beautypg.com

Controlling a single iqs-2400 wdm laser source – EXFO IQS-2400 WDM Laser Source for IQS-500/600 User Manual

Page 59

background image

Controlling Multiple WDM Laser Source Modules

WDM Laser Source

53

Controlling a Single IQS-2400 WDM Laser Source

To set delta current:

Delta current will be used with High Wavelength Stability and On/Off
Modulation modes.

For information, see Configuring Power or Delta Current on page 30.

Controlling a Single IQS-2400 WDM Laser

Source

You may want to control a specific module among all the IQS-2400 WDM
Laser Source modules that you have in the system.

To control a specific IQS-2400 WDM Laser Source:
1.
Make sure that the row corresponding to the module you want to

control appears in bold or that it is highlighted.

2. Use the Control Single Instrument button to open the IQS-2400 WDM

Laser Source application.

Delta current parameter controls