EXFO IQS-2400 WDM Laser Source for IQS-500/600 - Manual (Page 58)

Controlling Multiple WDM Laser Source Modules
52 IQS-2400
Setting Up Multiple IQS-2400 WDM Laser Source Modules
To set power:
Power will be used with Normal and Dither Modulation modes. With the
Quick Settings buttons, you can directly set the source power value to their
intrinsic Maximum or Minimum value.
For information, see Configuring Power or Delta Current on page 30.
To set delta temperature:
Delta temperature will be used with High Wavelength Stability and On/Off
Modulation modes.
For information, see Configuring Wavelength/Frequency or Delta
Temperature on page 26.
Power parameter controls
Delta temperature parameter controls