EXFO IQS-2400 WDM Laser Source for IQS-500/600 - Manual (Page 109)

SCPI Command Reference
WDM Laser Source 103
Product-Specific Commands—Description
:SOURce[1..n]:CURRent:STEP?
Description This query returns the minimum step available
when changing the laser current with the
SOURce[1..n]:ACCOutput command.
*RST has no effect on this command.
Syntax :SOURce[1..n]:CURRent:STEP?
Parameter(s) None
Response Syntax
Response(s) LimitStep:
The response data syntax for is
defined as a
element.
The response is a value
representing the minimum step available in
amperes.
Example(s) SOUR:CURR:STEP? Returns 1.000000E-004
See Also SOURce[1..n]:ACCOutput
SOURce[1..n]:CURRent:LIMit:HIGH?
SOURce[1..n]:CURRent:LIMit:LOW?
SOURce[1..n]:CURRent:RESolution?