beautypg.com

Mportant – EXFO IQS-2400 WDM Laser Source for IQS-500/600 User Manual

Page 56

background image

Controlling Multiple WDM Laser Source Modules

50

IQS-2400

Setting Up Multiple IQS-2400 WDM Laser Source Modules

To modify a particular parameter (all are set the same way):
1.
Select the tab associated with the parameter to be modified.

2. Use the and buttons to define the value that will be added to the

parameter value. If you want to decrease the parameter value, make
sure that the offset is negative.

Note: You can modify the step used when you increase or decrease the offset

value. Use the Offset Step up/down arrows to modify the step.

3. When you are satisfied with the offset value, use to confirm the new

setting.

Note: If the new offset value is out of the permitted range, the application displays

an error message.

To set the control mode:

For information, see Selecting a Control Mode on page 21.

I

MPORTANT

Before setting parameters or turning sources on, make sure that
their corresponding boxes are selected.

Apply button

Control
modes