EXFO IQS-2400 WDM Laser Source for IQS-500/600 - Manual (Page 83)

WDM Laser Source 77
A Technical Specifications
I
MPORTANT
The following technical specifications can change without notice.
The information presented in this section is provided as a reference
only. To obtain this product’s most recent technical specifications,
visit the EXFO Web site at www.exfo.com.
SPECIFICATIONS a
FTB-85102 FTB-8510-12 FTB-8510-2
Ports Gigabit Ethernet Two 10/100Base-T Two 10/100Base-T Two 10/100Base-T and two
and one Gigabit Ethernet
Connector types RJ-45 (ISO 8877) RJ-45 (ISO 8877) and LC RJ-45 (ISO 8877) and LC
Connect speed (Mb/s) 10/100 10/100/1000 10/100/1000
Duplex mode Full/half-duplex Full/half-duplex Full/half-duplex
auto-negotiation auto-negotiation auto-negotiation
Maximum port capacity (Mb/s) 200 (bidirectional) 2000 (bidirectional) 2000 (bidirectional)
Ethernet testing RFC 2544 RFC 2544 RFC 2544
RFC 1242 RFC 1242 RFC 1242
IQS-2402 SPECIFICATIONS
Model P4
Wavelength band (nm) 1308 ±5
Wavelength tuning range (nm) ±0.5 (typical)
Wavelength tuning resolution b (nm) 0.01
Wavelength accuracy
c, d
(nm) ±0.01
Wavelength stability
d, e
(nm) ±0.002
Output power
f
(dBm) 10
Output power attenuation range (dB) >6
Sidemode suppression
g
(dB) 30 (40 typical)
Output power uncertainty
c
(dB) ±0.3
Power stability
c, d
(dB) 15 min ±0.005 ( Δ= 0.01)
8 h ±0.03 ( Δ= 0.06)
Modulation frequency (internal or external sync.) (kHz) 0.010 to 300
Dithered modulation amplitude range
h
(mA) 1 to 5
Dithered modulation electrical waveform Square/triangular
SPECIFICATIONS a
FTB-85102 FTB-8510-12 FTB-8510-2
Ports Gigabit Ethernet Two 10/100Base-T Two 10/100Base-T Two 10/100Base-T and two
and one Gigabit Ethernet
Connector types RJ-45 (ISO 8877) RJ-45 (ISO 8877) and LC RJ-45 (ISO 8877) and LC
Connect speed (Mb/s) 10/100 10/100/1000 10/100/1000
Duplex mode Full/half-duplex Full/half-duplex Full/half-duplex
auto-negotiation auto-negotiation auto-negotiation
Maximum port capacity (Mb/s) 200 (bidirectional) 2000 (bidirectional) 2000 (bidirectional)
Ethernet testing RFC 2544 RFC 2544 RFC 2544
RFC 1242 RFC 1242 RFC 1242
IQS-2403 SPECIFICATIONS
Model P4/P5 P6/P7
Wavelength band C-band C-band
1528 nm to1565 nm 1528 nm to 1565 nm
Wavelength tuning range
a
(nm) ±1 ±1
Wavelength tuning resolution
b
(nm) 0.01 0.01
Wavelength accuracy
c, d
(nm) ±0.01 ±0.02
Wavelength stability
d, e
(nm) ±0.002 ±0.002
Output power
f
(dBm) 10 13
Output power attenuation range (dB) 10 10
Sidemode suppression
g
(dB) 30 (40 typical) 30 (40 typical)
Output power uncertainy
g
(dB) ±0.3 ±0.3
Power stability
c, d
(dB) 15 min ±0.005 ( Δ= 0.01) ±0.005 ( Δ= 0.01)
8 h ±0.03 ( Δ= 0.06) ±0.03 ( Δ= 0.06)
Modulation frequency (internal or external sync.) (kHz) 0.010 to 300 0.010 to 300
Dithered modulation amplitude range
h
(mA) 1 to 5 1 to 5
Dithered modulation electrical waveform Square/triangular Square/triangular