Eurocom D900F Panther Workstation - Manual (Page 160)

Modules
7 - 46 Intel Turbo Memory Module
7
Intel Turbo Memory Module
If you have included an Intel Turbo Memory (Robson) NAND flash memory card
module
in your purchase option, then you will need to enable AHCI or RAID mode
in the BIOS (see “Advanced Menu” on page 5 - 7 ) BEFORE installing the Win-
dows Vista operating system software (do not enable this option in Windows XP or
on a Windows Vista operating system that has been installed without the option en-
abled).
Note that if you are adding an Intel Turbo Memory (Robson) NAND flash memory
card module to a computer that already has an operating system and drivers etc. in-
stalled, you will need to reinstall the OS and all necessary drivers and utilities (make
sure you back up all your important data before doing so).
Intel Turbo Memory Technology (also known as Robson flash memory) is an Intel
technology that reduces the time it takes for a computer to boot up, to load applica-
tions, and to write data to the hard drive. Intel Turbo Memory Technology is sup-
ported in Windows Vista only (it also supports Windows Vista features such as
ReadyBoost, ReadyDrive, and Superfetch).
e-SATA Port
Support
Note that the Intel Ma-
trix Storage driver is
required to support
the e-SATA port even if
you have not included
an Intel Turbo Memory
module in your pur-
chase configuration.
Follow the instructions
provided here in order to
install the driver.