Eurocom D900F Panther Workstation - Manual (Page 154)

Modules
7 - 40 Setting Up SATA RAID or AHCI Modes
7
Windows Installation for Recovery Level RAID Systems
When you install Windows Vista for Recovery level RAID systems you will need to
provide the driver for the RAID system as per the instructions below. Firstly you will
need to go to an operable computer and copy the driver from the Device Drivers &
Utilities + User’s Manual disc to a USB Flash drive, external USB hard disk or ex-
ternal floppy disk drive and floppy diskette.
1. Go to the operable computer and insert a USB Flash drive, external USB hard disk
or external USB floppy disk drive and floppy diskette.
2. Insert the Device Drivers & Utilities + User’s Manual disc into the CD/DVD drive
of the operable computer.
3. Copy the RAID folder from the location below (D: denotes your DVD drive) on the
Device Drivers & Utilities + User’s Manual disc to the USB Flash drive, external
USB hard disk or floppy diskette.
• D:\Others\00RAID
4. Press a key at system startup to begin installing Windows from your Microsoft
Windows Vista disc.
5. Select your Language, Time and currency format and Keyboard or input method
and click Next.
6. Click Install Now.
7. Enter your product key and click Next.
8. Make sure your USB Flash drive, external USB hard disk or external USB floppy
disk drive and floppy diskette is attached to one of the USB ports on the computer.