Eurocom D900F Panther Workstation - Manual (Page 116)

Modules
7 - 2 Wireless LAN Module
7
Wireless LAN Module
If you have included an Intel® Wi-Fi Link 5100/5300 Series (802.11 a/g/n) or
802.11b/g WLAN module in your purchase option, make sure that the Wireless LAN
module is on before installing the driver.
Use the Fn + F11 key combination (see Table 1 - 4, on page 1 - 11 ) to toggle pow-
er to the Wireless LAN module (when the WLAN module is on, the LED
will be green). Make sure you install the drivers in the order indicated in Table 4 -
1, on page 4 - 3 .
The standard driver installation procedure for the Intel® Wi-Fi Link 5100/5300 Se-
ries module is outlined overleaf. If you want to include Intel® My WiFi Technol-
ogy as part of the installation procedure, DO NOT install the driver as per the
instructions overleaf, instead see
“Intel® My WiFi Installation & Configuration”
on page 7 - 7 .
If you have installed the standard driver (as per the instructions overleaf) and wish
to enable Intel® My WiFi Technology at a later point you will need to reinstall the
driver (choose Unlock from the Drivers Installer menu). Follow the driver installa-
tion procedure and choose Modify from the menu when the option appears, and then
follow the remaining installation instructions in
“Intel® My WiFi Installation &
Configuration” on page 7 - 7 .
Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission de-
vices aboard aircraft is usu-
ally prohibited. Make sure
the module(s) are OFF if
you are using the computer
aboard aircraft.
Use the Fn + F11 key com-
bination to toggle power to
the WLAN module, and
check the indicator to see if
the module is powered on
or not (see
Table 1 - 4, on
page 1 - 11 / Table 1 - 2, on
page 1 - 8 ).