4 msslp, 4 msslp – measurements sigtran link print, Msslp – Dialogic SS7G2X User Manual
Page 95: Measurements sigtran link print, Comman, Is set to 0. see the
95
Dialogic
®
SS7G2x Signaling Server SGW Mode User Manual Issue 4
6.10.4
MSSLP – Measurements SIGTRAN Link Print
Synopsis
This command prints traffic measurements for SIGTRAN signaling links. The measurements are cumulative
between system startup and the next time the measurements are reset.
The fields have the following meanings:
•
SNLINK - SIGTRAN signaling link
•
RXCK - Number of data chunks received
•
TXCK - Number of data chunks transmitted
•
RTXCK - Number of data chunks re-transmitted
•
NOOS - Number of times a SIGTRAN link has either been aborted or shutdown
•
OSDUR - Duration that the link was not in service
•
PERIOD - Time since measurements on the route were last reset. Specified in hours, minutes and
seconds
Syntax
=,][
Prerequisites
•
If specified, the SIGTRAN signaling link must be an initiated and unblocked.
Attributes
None
Examples
MSSLP:
MSSLP;
Output Format
SIGTRAN Link Traffic Measurements
SNLINK RXCK TXCK RTXCK OSDUR NOOS PERIOD
1 54 6330 23 0 0 05:00:00
2 21 12 345 0 0 05:00:00
3 12 53 500 0 0 05:00:00
EXECUTED