Dialogic SS7G2X - Manual (Page 116)

116
Chapter 6 Command Definitions
6.13.3 SNALP – SIGTRAN Application Server List Print
Synopsis
This command reports the relationship between a SIGTRAN Application Server (AS) and SIGTRAN links.
Syntax
SNALP;
SNALP:
AS =;
SNALP: SNLINK =;
Prerequisites
•
The server/hunt sequence combination has already be initiated.
Attributes
None
Examples
SNALP;
Output Format
Application Server List Configuration
AS
AS LABEL SEQ SNLINK SNLINK LABEL
1 AS1 1 1 ASP1
1 AS1 2 2 ASP2
2 AS2 1 3 ASP3
EXECUTED
6.13.4 SNAPI – SIGTRAN Application Server Initiate
Synopsis
This command initiates an adjacent Application Server (AS). An AS is a logical entity representing an SS7
end point that can process either circuit-related or non circuit-related signaling. The end point is represented
by a routing context which uniquely identifies a routing key combination of SIO/
DPC / OPC and CIC range.
See Section 7.2, “Signaling Configuration” on page 136 for a more detailed description of SIGTRAN signaling
configuration.
Syntax
SNAPI: AS =, DPC =, RC =, NC =,[ PCMD =,][ NASP =,][ LABEL =,];
Prerequisites
•
The AS has not already been initiated.
•
No other AS can use the routing context.
•
No more than 32 ASs can be configured with the same DPC / NC combination.
•
All ASs within the same DPC / NC combination must have the same PCMD value.
Attributes
CONFIG
Examples
SNAPI: AS =1, DPC =555, RC =1, NC =1;