Dialogic SS7G2X - Manual (Page 78)

78
Chapter 6 Command Definitions
6.7.3 IPGWI – Internet Protocol Gateway Initiate
Synopsis
This command allows the user to specify a route ( IPGW ) to a IP network ( IPNW ) via an IP gateway
( GATEWAY ) for a range of IP addresses within that network as defined by a network mask ( MASK ).
Syntax
IPGWI: IPGW =, MASK =, GATEWAY =, IPNW =;
Prerequisites
•
The IP gateway ID has not been initiated.
•
Two gateways cannot have overlapping IP addresses.
Attributes
CONFIG
Examples
IPGWI: IPGW =1, MASK =255.255.255.0, GATEWAY =194.192.185.1,
IPNW =128.66.1.0;
6.7.4 IPGWE – Internet Protocol Gateway End
Synopsis
This command removes an IP route via an IP gateway.
Syntax
IPGWE: IPGW =;
Prerequisites
•
The IP gateway ID has already been initiated.
Attributes
CONFIG
Examples
IPGWE: IPGW =1,;