4 software update, 5 configuration backup, 6 configuration update – Dialogic SS7G2X User Manual
Page 157: 7 software option installation, Software update, Configuration backup, Configuration update, Software option installation
157
Dialogic
®
SS7G2x Signaling Server SGW Mode User Manual Issue 4
PCM Traffic Measurements
Periodic reports conveying PCM performance data can be configured using the
associated with the report using the
command. PCMs can be removed from the report using the
command.
The
parameter should be MSPCM.
SIGTRAN Link Traffic Measurements
Periodic reports conveying SIGTRAN link performance data can be configured using the
command.
SIGTRAN Links (
) are associated with the report using the
command. SIGTRAN Links can be
removed from the report using the
The
parameter should be MSSL.
Ethernet Port Traffic Measurements
Periodic reports conveying Ethernet performance data can be configured using the
command.
ports are associated with the report using the
ports can be removed from the report
The
parameter should be MSEP.
System Measurements
Periodic reports conveying system performance data can be configured using the
command. There are
no associated data types for use with this command.
The
parameter should be MSSY.
9.5.4
Software Update
See
Section 4.11.1, “Software Update from a Remote Data Centre” on page 24
for example MML that
upgrades the Signaling Gateway software from an RDC.
9.5.5
Configuration Backup
See
Section 4.12.1, “Configuration Backup to Remote Data Centre” on page 25
for example MML that
upgrades the Signaling Gateway configuration from an RDC.
9.5.6
Configuration Update
See
Section 4.13.1, “Configuration Update from a Remote Data Centre” on page 26
for example MML that
upgrades the Signaling Gateway configuration from an RDC.
9.5.7
Software Option Installation
See
Section 4.14.3, “License Update from Remote Data Centre” on page 28
for example MML that installs
software options onto the Signaling Gateway from an RDC.