3 sgdpe, 4 sgdpp, 3 sgdpe – signaling gateway destination point end – Dialogic SS7G2X User Manual
Page 108: Sgdpe, Signaling gateway destination point end, Sgdpp, Signaling gateway destination point print
108
Chapter 6 Command Definitions
6.12.3
SGDPE – Signaling Gateway Destination Point End
Synopsis
This command ends a Signaling Gateway destination point.
Syntax
SGDPE:
Prerequisites
•
The destination ID has already been initiated.
•
The destination ID is not used elsewhere in the system.
Attributes
CONFIG
Examples
SGDPE:
6.12.4
SGDPP – Signaling Gateway Destination Point Print
Synopsis
This command prints the configuration of routing parameters on a SS7 Signaling Gateway.
Syntax
=];
Prerequisites
•
The destination ID has already been initiated.
Attributes
None
Examples
SGDPP;
Output Format
SS7 Routing Key Configuration
DEST RTPRI AS LABEL
1 NONE 1 AS1
2 IP SGW2
3 MTP DEST3
EXECUTED