3 c7lse, 4 c7lsp, C7lse – ccs ss7 link set end – Dialogic SS7G2X User Manual

Page 69: C7lsp – ccs ss7 link set print, C7lse, Ccs ss7 link set end, C7lsp, Ccs ss7 link set print

Dialogic

SS7G2x Signaling Server SGW Mode User Manual Issue 4

6.6.3

C7LSE – CCS SS7 Link Set End

Synopsis

This command is used to end the SS7 link set.

Syntax

C7LSE:

Prerequisites

•

There should be no signaling links attached to the link set.

•

All configured SS7 links within the system must be blocked.

Note: After blocking, an SS7 link cannot be unblocked until all the boards processing the SS7 signaling

are blocked and then unblocked.

•

There are no C7 Routes using this link set.

Attributes

CONFIG

Examples

C7LSE:

6.6.4

C7LSP – CCS SS7 Link Set Print

Synopsis

This command obtains a printout of the attributes for the SS7 link set. If no link is specified, the values for all
link sets are shown.

Syntax

C7LSP:[

=,];

Prerequisites

None

Attributes

None

Examples

C7LSP;

Output Format

CCS SS7 Link Set
LS NC OPC DPC NI LSSIZE SS7MD
1 1 1 3 2 2 ITU14
2 2 2 4 0 2 ANSI
EXECUTED