Aiwa NSX-999 - Manual (Page 34)

CD PLAYING
PROGRAMMED PLAY
1
PRGM
n:GU '/[N'T
The CD player has a built-in memory function that aiiows piay of up
to 30 tracks over three discs in any order.
1 Press the PRGM button in stop mode.
The PRGM indicator flashes in the dispiay.
2 Press one of the DISC DIRECT PLAY buttons to
select a disc.
The seiected disc is indicated in red in the display.
Go to the next step when the tray stops rotating.
3 Press the numeric buttons and the +10 button to
program a track.
Example:
© To select the 6th track, press the 6 button.
© To select the 16th track, press the +10 button and then
press the 6 button within 4 seconds.
© To select the 20th track, press the +10 button twice and
then press the 0 button within 4 seconds.
DISC
r-DIRECT PLAY-,
Q CD CD
H 3: 33
^...........
LI. U U ' I ^
* —
ZI314:
iiig
10 12
• ^
i||
r
■
©
+ 10
O
© +10 +10
© ©
( 4
L-' 5:5 li '
■..... EiSiPli
.. r T/ 3
DIRECTION PRESET
DISPLAY
When each track selected, the display @ is shown. In a few
seconds, the display changes to ®.
® Program number
(
2 ) Disc number
(3) Selected track number
The display changes after a few seconds.
® Total playing time of the selected tracks
® Total number of selected tracks
4 Repeat steps 2 to 3 to program other tracks.
5 Press the <>■ button to start play.
To check the program
Each time the ◄◄ DOWN or ►► UP button is pressed before
playing, a disc number, atrack number, and a program number will
be displayed.
To clear the program
Press the ■ CLEAR button before playing or press the ^ OPEN/
CLOSE button.
To add tracks to the program
Before playing, carry out steps 2 and 3. The track will be pro­
grammed after the last track.
To change the programmed tracks
Clear the program and carry out all the steps again.
NOTE
' The DISC CHANGE button does not operate during programmed
play.
' During programmed play, the remaining time is not displayed
when the CD EDIT/REMAIN button is pressed.
' Random play cannot be combined with programmed play.
34