YSI 600LS - User Manual - Manual (Page 15)

Sondes Section 2
YSI Incorporated Environmental Monitoring Systems Operations Manual 2-9
REMOVING THE PORT PLUGS
Using the long extended end of the probe installation tool supplied in the YSI 6570
Maintenance Kit, remove the port plugs. Save all the port plugs
Figure 15
for possible future use.
There are a variety of probe options for the sondes. Figures 15, 16 and 17
illustrate the uses of the common tool for port plug removal.
Note that this tool will also be used to install the various probes.
If the tool is misplaced or lost, you may use 7/64” and 9/64” hex keys as
substitutes.
Figure 16 Figure 17
Figure 18
NOTE: You may need pliers to remove the ISE port
plugs, but do not use pliers to tighten the ISE probes.
Hand-tighten only.
Now refer to Figures 19-24 to find the probe locations in
your sonde.
OPTIC
PORT PLUG
INSTALLATION
TOOL
DO, COND., &
pH/ORP PORT
PLUGS
INSTALLATION
TOOL
ISE PORT PLUG
PLIERS
(SLIP JAWS)