YSI 5200A - Manual (Page 110)

YSI 5200A
219
YSI 5200A
218
Menu Maps

continued next page
Run Screen → Menus → Sensor Setup → DO
DO (Enabled)
DO (Enabled)
Control Mode (Set Point)
T
Set Point
PID/PWM
Alarms (Disabled)
Membrane Type (PE 2.0 mil (Blue))
T
Teflon 2.0mil (Gray)
PE 2.0mil (Blue)
Display Format (mg/l)
T
mg/l
Sat
mg/l and Sat
mg/l and Temp
Sat and Temp
mg/l, Sat and Temp
Salinity (Not Available)
0‐80 ppt
Elevation (0 Feet)
0‐200X100ft
Alarm Low (3.50 mg/l)*
0.0 to 60.0 mg/l
Relay (Disabled)
Alarm Low (Disabled)
Instrument (Local Machine)
Relay (Relay 1)
T
Relay1
Relay2
Relay 3
Relay 4
S t P i t t l l R L 2 (4 00 /l)* Set Point control only Range Low 2 (4.00 mg/l)*
4.0 to 60.0 mg/l
Relay (Disabled)
Range Low (Disabled)
Instrument (Local Machine)
Relay (Relay 1)
T
Relay1
Relay2
Relay 3
Relay 4
Set Point control only Range Low (5.00 mg/l)*
5.0 to 60.0 mg/l
Relay (Disabled)
Range Low (Disabled)
Instrument (Local Machine)
Relay (Relay 1)
T
Relay1
Relay2
Relay 3
Relay 4
Set Point (8.00 mg/l)*
5.0 to 60.00 mg/l
Menu Maps
Run Screen → Menus → Sensor Setup →
DO continued from previous page
PID/PWM control only Control Up/Down (Rising)
T
Rising
Falling
P.I.D. Mode
T
Sat
mg/l
PID/PWM control only P.I.D. Interval (100.00)
1.00 to 999.90
PID/PWM control only P.I.D. Reset Interval (20.00)
1.00 to 999.90
PID/PWM control only P.I.D. Gain (2000)
0.00 to 10.00
1.00 to 999.90
PID/PWM control only P.I.D. Relay (Disabled)
Range Low (Disabled)
Instrument (Local Machine)
Relay (Relay 1)
T
Relay1
Relay2
Relay 3
Relay 4
Set Point control only Range High (8.50 mg/l)*
8.0 to 60.0 mg/l
Relay (Disabled)
Range High (Disabled)
Instrument (Local Machine)
Relay (Relay 1)
T
Relay1 y
Relay2
Relay 3
Relay 4
Set Point control only Range High 2 (8.70 mg/l)*
8.5 to 60.0 mg/l
Relay (Disabled)
Range High (Disabled)
Instrument (Local Machine)
Relay (Relay 1)
T
Relay1
Relay2
Relay 3
Relay 4
Alarm High (9.0 mg/l)*
8.7 to 60.0 mg/l
Relay (Disabled)
Alarm High (Disabled)
Instrument (Local Machine)
Relay (Relay 1)
T
Relay1
Relay2
Relay 3
Relay 4