Solvline Eddy DKV2.1.0.3 - Manual (Page 83)

Chapter 6. Library
Introduction
83
Format void SB_GetVersion (int type, char *version);
Parameter type Specifies the version function reads.
‘B’: Eddy’s bootloader version
‘K’: Eddy’s O/S version
‘F’: Eddy’s file system version
Version Pointer where version information string will be stored.
Returns None
Notice Version information will be read like ‚1.0a.‛
BootLoader and O/S will be provided by SystemBase; therefore these
cannot be changed. In case file system is programmed by the user, the
version can be set by the user.
When the parameter type other than ‘B’ ,’K’, ‘F’ are called, the
function will return ‚0.00‛ as version information.
SB_ReadConfig
Function Reads Eddy’s operating environment configuration file.
Format void SB_ReadConfig (char *FileName, char *Dest, int Size);
Parameter FileName File name that includes the path of the file to be read.
*Dest Pointer to the buffer in which the configuration file will be
stored.
Size The size of the file to be read.
Returns Error Code Returns 1 if succeeded, -1 if failed.
Notice Configuration file in Eddy is stored in /etc, /flash. Configuration changes
made through web or telent is stored here and all Eddy applications
operates with respect to configuration files here.
SB_WriteConfig
Function Saves Eddy’s operating environment configuration information into file.
Format void SB_WriteConfig (char *FileName, char *Source, int Size);
Parameter FileName File name that includes path of the file to be written.
Source Pointer to the struct buffer in which the configuration
information is saved.
Size Size of the struct to be written.
Returns Error Code Return 1 if succeeded, -1 if failed.
Notice
SB_GetSharedMemory