Solvline Eddy DKV2.1.0.3 - Manual (Page 121)

Chapter
9. Appendix
121
Classification Specification
Dev Tools LemonIDE & SDK
Physical
characteristics
Power Input 3.3 V (200mA Max)
Dimensions 59.75 x 61.80 x 4 mm
Weight 15 g
Environment
Operating Temp -40 ~ 85°C
Storage Temp -66 ~ 150°C
Humidity 5 ~ 95% Non-Condensing
CE Class A,
FCC Class A,
RoHS
compliant
9.3.4 Eddy-S4M-DK v2.1 Specifcatons
Classification Specification
Serial Port
2 x RS232 DB9 Male
2 x RS422/485 5pin Terminal Block (S/W Selectable & with Auto
toggle)
SD Card Connector
Push Type, Up to 16 GB
MMC / SD Card / MC supported
MCI Interface SD Card, MMC Socket
ADC Interface Light Sensor
USB Connector 1 x Device, 2 x HOST, Dual-Port
LAN Port RJ45 with transformer
Console Port DB9 Male
Switch
Power ON/Off switch
Serial RS422/485 Termination resistor configuration switch
Input switch for testing GPIO (Off : Low, ON : High)
LED RDY, Power, 34 Programmable IO, Console & Serial TxD, RxD LED
JTAG Port Used for downloading code and single-stepping through programs
Reset Button
Factory Default & Warm Boot
(If you posh more than 5, active Factory default)
JIG connection
socket
2 2x23pin socket, which connect JIG board to confirm problems
Expansion Header 2x22pin Header, used to test GPIO of Eddy-S4M
Input Power 5 VDC
Dimensions 160 x 120 mm