Cabletron Systems Expansion module 6H122-08 - Manual (Page 52)

Chapter 5: Local Management
5-8 6H122-08 User’s Guide
Telnet Connections
Once the module or chassis has a valid IP address, the user can establish a
Telnet session with Local Management from any TCP/IP based node on
the network. Telnet connections to the 6H122-08 require the community
name passwords assigned at the SNMP Community Names screen of
either the 6C105 chassis, or the module. For additional information about
community names, refer to
Section 5.8 . Refer to the instructions included
with the Telnet application for information about establishing a Telnet
session.