Cabletron Systems Expansion module 6H122-08 - Manual (Page 143)

Network Tools
6H122-08 User’s Guide 5-99
bridge:
Syntax: bridge [ENABLE/DISABLE] [IFNUM/ALL]
Description: The bridge command allows each bridge port to
be enabled or disabled at the user’s request,
either one at a time or all at once. Specifying a
single interface number will affect the bridging
status of that interface, while specifying ALL
will affect every interface.
Options: Not Applicable
Example:
-> bridge disable all
-> bridge enable 1
051468
-> bridge disable 1