Cabletron Systems Expansion module 6H122-08 - Manual (Page 19)

Optional Features
6H122-08 User’s Guide 1-9
1.4.6 Additional Local Management Functions
Local Management also allows the following tasks to be performed:
• Manage any module installed in the 6C105 via a single terminal
connection.
• Assign an IP address and subnet mask to the 6H122-08 and 6C105
chassis.
• Select a default gateway.
• Control local and remote access.
• Designate workstations to receive SNMP traps from the 6H122-08 and
6C105 chassis.
• Configure module specific SNMP MIB objects including the IETF
Bridge MIB objects.
Chapter 5 provides detailed information about Local Management of the
6H122-08, the optional Fast Ethernet Interface Modules and the 6C105
chassis.
1.5 OPTIONAL FEATURES
For 6H122-08 users, the optional Fast Ethernet Interface Modules provide
the ability to select fiber optic ports or add more Twisted Pair ports. The
Fast Ethernet Interface Modules are listed in
Table 1-1 .
Table 1-1 Fast Ethernet Interface Modules
P/N Description Application
FE-100TX
Uses RJ45
connector
Supports Category 5 Unshielded Twisted Pair
(UTP) cabling with an impedance between 85
and 111 ohms.
FE-100FX
Uses SC
connector
Supports multimode fiber optic cabling.
FE-100F3
Uses SC
connector
Supports single mode fiber optic cabling.