Cabletron Systems Expansion module 6H122-08 - Manual (Page 43)

Using the RESET Button
6H122-08 User’s Guide 4-7
4.4 USING THE RESET BUTTON
The RESET button located near the upper plastic locking tab of the
module (refer to Figure 4-3) resets the 6H122-08 processor without
affecting the NVRAM.
Figure 4-3 RESET Button
To reset the 6H122-08 processor, press and release the RESET button.
The module processor goes through a reset process of approximately 20
seconds. Additional downtime may be added as the module reenters the
network.
!
CAUTION
Pressing the RESET button resets the device, and all current
switching being performed by the module is halted. A module
downtime of up to two minutes will result from this action.
Reset Button
2159-09
6H122-08
FAST ENET