C.1 required tools, C.2 setting the mode switch, Appendix c – Cabletron Systems Expansion module 6H122-08 User Manual
Page 159: Er to, Section c.2
6H122-08 User’s Guide
C-1
APPENDIX C
OPTIONAL INSTALLATIONS AND
MODE SWITCH BANK SETTINGS
This appendix covers the following items:
•
)
•
Locations, functions, and settings for the mode switches (
)
•
Installing Optional Fast Ethernet Interface Modules (
)
C.1
REQUIRED TOOLS
You need the following tools to perform the procedures provided in this
appendix:
•
Antistatic wrist strap (provided with 6C105 chassis)
C.2
SETTING THE MODE SWITCH
These switches are set at the factory and do not need to be changed unless
you intend to perform the following:
•
Force download a new image file from a BootP server.
•
Clear NVRAM and restore all user-entered parameters such as the IP
address and Subnet Masks to the 6H122-08 “Default” configuration
settings.
•
Clear user-entered passwords stored in NVRAM and restore the
default passwords.
NOTE
A Phillips screwdriver is required when installing optional Fast
Ethernet Interface Modules for ports 7 and 8 into the 6H122-08.