Cabletron Systems Expansion module 6H122-08 - Manual (Page 116)

Chapter 5: Local Management
5-72 6H122-08 User’s Guide
5.21 SYSTEM RESOURCES SCREEN
The System Resources screen, Figure 5-27 , provides information
concerning the processor used in the 6H122-08 and the amount of
FLASH memory, DRAM, and NVRAM that is installed and how much of
this memory is available.
Access the System Resources screen from the Module Specific
Configuration Menu screen by using the arrow keys to highlight the
SYSTEM RESOURCES menu item and pressing ENTER. The System
Resources screen displays.
Figure 5-27 System Resources Screen
The following briefly explains each field of the System Resources screen.
CPU Type (Read-only)
Indicates the microprocessor used in the 6H122-08.
Flash Memory Installed (Read-only)
Indicates the amount of FLASH memory installed in the 6H122-08 and
how much is currently available.
Firmware Revision: XX.XX.XX
System Resources
2159-40
BOOTPROM Revision: XX.XX.XX
Flash Memory Installed : X MB
DRAM Installed: XX MB
NVRAM Installed: XX KB
Available: XXXXX Bytes
Available: XXXXX Bytes
Available: XXXXX Bytes
CPU Type: i960 HT 25Mhz
Current Switch Utilization: 66%
Peak Switch Utilization: 75%
Reset Peak Switch Utilization: [NO]
Module Type: 6H122-08
Slot Number: X
EXIT
6H122-08 LOCAL MANAGEMENT
Event Message Line
SAVE
RETURN
RETURN