Motorola moto x - Manual (Page 88)

Tools and Calendar 79
3. Touch ON to turn on and scan. If Bluetooth power is already on, touch SEARCH FOR
DEVICES.
4. Touch a device to connect.
5. If necessary, touch OK, or enter the device passkey (like 0000) to connect to the device. When
the device is connected, the Bluetooth indicator appears in the status bar.
Note: Using a mobile device or accessory while driving may cause distraction and may be illegal.
Always obey the laws and drive safely.
NFC Method
You can also use Near Field Communication (NFC) to pair an NFC enabled Bluetooth device to
your phone.
1. To turn NFC on, touch Apps > Settings > More… > NFC.
2. Make sure your phone’s screen is on, and then touch the Bluetooth device to your phone’s NFC
tag location, which is located on the back of your phone. Hold the device to the phone until
pairing is complete.
Reconnect Devices
Once you have paired a Bluetooth device with your phone reconnecting it is simple.
n
To automatically reconnect your phone with a paired device, simply turn on the device.
n
To manually reconnect your phone with a paired device, touch the device name in the Bluetooth
devices list.
Disconnect Devices
When you are not using a Bluetooth device, you can disconnect it from your phone.
n
To automatically disconnect your phone from a paired device, simply turn off the device.
n
To manually disconnect your phone from a paired device, touch the device name in the devices
list, and then touch OK.
Rename the Phone
You can change the device name for your phone.
n
Touch Apps > Settings > Bluetooth > Menu > Rename phone. Edit the existing
name, or enter a new name, then touch Done.