Motorola moto G - Manual (Page 9)

Get Started 2
Caution: Before using your phone, please read the safety, regulatory and legal information
provided with your product.
1. Plug the USB connector into the charger/accessory jack on the bottom of your phone.
2. Plug the AC adapter into an electrical outlet. Fully charging a battery may take up to three hours.
Your phone may turn on when you connect the AC adapter to the outlet—this is normal.
Note: Your phone’s battery should have enough charge for the phone to turn on and find a signal,
run the setup application, set up voicemail, and make a call. You should fully charge the battery as
soon as possible.
Note: Don't try to remove or replace the battery yourself—doing so may damage the battery and
could cause burning and injury. If your phone becomes unresponsive, try a reboot—press and hold
the Power key until the screen goes dark, and your phone restarts.
Any time you want to see what's using up phone battery power, touch Apps > Settings >
Battery. To set automatic rules to save power, touch Apps > Assist.
Activation and Service
The following topics guide you through setting your phone up on Sprint Prepaid, activating your
phone, and getting help and information about your Sprint Prepaid service.
Register Your Phone on Sprint Prepaid
Before using your phone, you must register it online with Sprint Prepaid.
1. Get your numbers
You will need the phone’s MEID (DEC) number to activate your phone. The MEID (DEC) can be
located on the box that the phone came in. The MEID is an 18-digit number.
2. Get activated
Go to sprint.com/prepaidactivate . During the activation process you can choose to get a new
number or use an existing number.